聯(lián)系我們  |  產(chǎn)品中心  |  信息中心 

The PRO560 series is similar in design to the PRO280 series stages but provides additional load carrying capability with a wider cross-section.

PRO560 Specifications

Model		PRO560-0300	PRO560-0400	PRO560-0500	PRO560-0600
Travel		300 mm	400 mm	500 mm	600 mm
Accuracy(1)		±17.5 μm	±19 μm	±21 μm	±23 μm
Resolution		0.5 μm with 2500-line Quadrature Encoder/0.1 μm with 1000-line AS Encoder
Bidirectional Repeatability(1)		±1 μm
Straightness and Flatness		7 μm	9 μm	10 μm	12 μm
Maximum Speed(2)		220 mm/s
Maximum Acceleration		Function of Motor Selection and Sizing
Maximum Force (Continuous)		687 N
Load Capacity(3)	Horizontal	150 kg
	Side	150 kg
	Vertical	70 kg
Moving Mass	No Tabletop	9.9 kg
	Tabletop	16.2 kg
Stage Mass	Less Motor	65.0 kg	70.9 kg	76.9 kg	83.0 kg
	With Motor	70.0 kg	75.9 kg	81.9 kg	88.0 kg
Material		Black Anodized Aluminum Body with Hardcoated Tabletop
MTBF (Mean Time Between Failure)		30,000 hours

1. Certified with the PLOTS option.
2. Excessive duty cycle may impact stage accuracy. Maximum speed limited to 167 mm/s when using BMS465 motor.
3. Payload specifications are for single-axis system and based on ball screw and bearing life of 2500 km (100 million inches) of travel.
4. Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.

PRO560 Specifications

Model		PRO560-0800	PRO560-1000
Travel		800 mm	1000 mm
Accuracy(1)		±26 μm	±27.5 μm
Resolution		0.5 μm with 2500-line Quadrature Encoder/0.1 μm with 1000-line AS Encoder
Bidirectional Repeatability(1)		±1 μm
Straightness and Flatness		14 μm	17 μm
Maximum Speed(2)		220 mm/s	140 mm/s
Maximum Acceleration		Function of Motor Selection and Sizing
Maximum Force (Continuous)		687 N
Load Capacity(3)	Horizontal	150 kg
	Side	150 kg
	Vertical	70 kg
Moving Mass	No Tabletop	9.9 kg
	Tabletop	16.2 kg
Stage Mass	Less Motor	95.0 kg	106.9 kg
	With Motor	100.0 kg	111.9 kg
Material		Black Anodized Aluminum Body with Hardcoated Tabletop
MTBF (Mean Time Between Failure)		30,000 hours

1. Certified with the PLOTS option.
2. Excessive duty cycle may impact stage accuracy. Maximum speed limited to 167 mm/s when using BMS465 motor.
3. Payload specifications are for single-axis system and based on ball screw and bearing life of 2500 km (100 million inches) of travel.
4. Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.

Electrical Specifications

Drive System	Precision Ground Ball-Screw with Brushless Servomotor
Feedback	2500-line Quadrature Encoder on Motor/1000-line AS Encoder on Motor
Maximum Bus Voltage	320 VDC
Limit Switches	5 V, Normally Open or Normally Closed; 24 V Normally Closed
Home Switch	Near Motor End

Recommended Controller

Multi-Axis	A3200	Ndrive CP, Ndrive HPe, Npaq
	Ensemble	Ensemble CP, Ensemble HPe
Single Axis	Soloist	Soloist CP, Soloist HPe

• Cantilevered load capability of the PRO560

Dimensions

• PRO560
• Accessory Tabletop

Ordering Information

Ordering Example

PRO560

-05MM

-1000

-TTM

-5V-NC

-BMS

-3

-FB05

-NONE

-PLOTS

Ordering Options

Series	Ball Screw	Travel (mm)	Tabletop	Limits	Motor	Cable Exit	Options	Coupling	Testing
PRO560	-05MM	-0300 -0400 -0500 -0600 -0800 -1000	-NO TT -TTM -TTU -TTACC /WIPER	-5V-NC -5V-NO -24V-NC	-BMS -BMS-BRK -NM -BMS-AS -BMS-AS-BRK -BM -BM-BRK -BM-AS -BM-AS-BRK	-0 -3 -5 -8 -12	-FB05 -LIFTING	-NONE -C05	-PLOTS -NO PLOTS

Ball Screw

Option	Description
-05MM	5 mm per revolution ball screw

PRO560 Series Linear Ball-Screw Stage

Option	Description
-0300	300 mm travel stage with ball screw and limits
-0400	400 mm travel stage with ball screw and limits
-0500	500 mm travel stage with ball screw and limits
-0600	600 mm travel stage with ball screw and limits
-0800	800 mm travel stage with ball screw and limits
-1000	1000 mm travel stage with ball screw and limits

Tabletop

Option	Description
-NO TT	No tabletop
-TTM	Metric hole-pattern tabletop
-TTU	English hole-pattern tabletop
-TTACC	Accessory tabletop with mounting pattern for Aerotech rotary stages; see drawings for the supported stage types
/WIPER	Wiper option available on all tabletops

Limits

Option	Description
-5V-NC	5 V normally-closed limits
-5V-NO	5 V normally-open limits
-24V-NC	24 V normally-closed limits

Motor

Option	Description
-BMS	Brushless servomotor with 2500-line feedback encoder (BMS465-AH-MS-E2500H)
-BMS-BRK	Brushless servomotor with 2500-line feedback encoder and motor mounted brake (BMS465-AH-MS-E2500H-BK2)
-NM	No motor
-BMS-AS	Brushless slotless servomotor with 1000-line amplified sine encoder (BMS465-A-MS-E1000ASH)
-BMS-AS-BRK	Brushless slotless servomotor with 1000-line amplified sine encoder and brake (BMS465-A-MS-E1000ASH-BK2)
-BM	Brushless servomotor with 2500-line feedback encoder (BM500-MS-E2500H)
-BM-BRK	Brushless servomotor with 2500-line feedback encoder and motor mounted brake (BM500-MS-E2500H-BK2)
-BM-AS	Brushless servomotor with 1000-line amplified sine encoder (BM500-MS-E1000ASH)
-BM-AS-BRK	Brushless servomotor with 1000-line amplified sine encoder and motor mounted brake (BM500-MS-E1000ASH-BK2)

Motor Orientation

Option	Description
-0	No motor
-3	Left cable exit
-5	Right cable exit
-8	Right-side foldback
-12	Left-side foldback

Options

Option	Description
-FB05	Motor foldback kit for 0.5-inch diameter motor shaft (required for BMS465 motor)
-LIFTING	Threaded inserts and lifting lugs; recommended for longer travel stages and XY assemblies

Coupling

Option	Description
-NONE	No motor coupling supplied
-C05	0.5-inch diameter motor shaft coupling

Testing

Option	Description
-PLOTS	Accuracy, repeatability, straightness and flatness plots
-NO PLOTS	No performance plots

Accessories (to be ordered as separate line item)

Option	Description
ALIGNMENT-NPA	Non-precision XY assembly
ALIGNMENT-PA10	XY assembly; 10 arc-second orthogonal
ALIGNMENT-PA5	XY assembly; 5 arc-second orthogonal
TC-PRO560	Toe clamps for mounting PRO stage to an English dimension breadboard or hole pattern; recommended number of toe clamps for each travel length: 300 mm travel = 4 clamps; 400-800 mm travel = 8 clamps; 1000 mm travel = 12 clamps

*Please go HERE for complete information on XY, XZ and YZ assembly options.

*Please go HERE for complete information on motor orientation options.